Review Summary of Xiaomi Mesh System AX3000 The Xiaomi Mesh Wi-Fi router (Xiaomi Mesh System AX3000) looks good in terms of design, but in terms of materials, it doesn't feel like it exceeds the price, and the size is larger than expected. You can connect to the router through a web browser and set up the router, but only English is supported, so you must be able to read a little English. Even if it is difficult to use English, it can be used sufficiently by using the browser's translation function, but it is a pity compared to supporting Korean on its own. To briefly summarize what I felt after buying the Xiaomi Mesh WiFi router (Xiaomi Mesh System AX3000) and using it for over a month, I can say that it is a mesh WiFi router with high cost-effectiveness that supports WiFi6. However, since the price is the price, I think it is a router that is satisfactory and usable if you consider that there are some deficiencies and use it. Detailed review of Xiaomi Mesh System AX3000 can be found in the user reviews section. You can check the components and appearance of the product by entering the link below. table of contents Size and weight of Xiaomi Mesh System AX3000 Xiaomi Mesh Wi-Fi Router (Xiaomi Mesh System AX3000) Testimonials, Reviews "If you found this blog helpful, please leave a comment or like it" If you have any questions or inquiries regarding the content of the post, please ask in the comments and I will respond . Xiaomi Mesh Wi-Fi Router (Xiaomi Mesh System AX3000) Weight, Dimensions The weight of one router is 506.7g, and the weight of the adapter is 76.7g. Looking at the weight of the router alone, it's not light, but when you look at it from the outside, it's pretty light considering the size. Considering that the previous Linksys Mesh Wi-Fi AC2600 model weighs about 321g per router, I think it is light in weight compared to its size. The purchased model is a global version and the adapter is a EU type plug. To briefly explain the EU type plug method, it has almost the same size as the 220v plug used in Korea, so it can be used as it is unlike other foreign outlets. However, since the thickness of the part connected to the outlet is thin and the outlet is a little loose when plugged in, it is recommended to connect and use the so-called 'pig nose' adapter for 220v. The Xiaomi Mesh System AX3000 router is vertically long and horizontally square. When the length of each side was measured, it came out slightly different at 96.1mm and 96.5mm, but you can think of it as a difference due to measurement error. It measures 21.5 cm in length and is quite long. As you can see from the user reviews, it has a length that is more than 1/3 larger than the Linksys router. Xiaomi Mesh Wi-Fi Router (Xiaomi Mesh System AX3000) Testimonials, Reviews 1. Xiaomi Mesh Wi-Fi Router (Xiaomi Mesh System AX3000) Appearance Review As you can see in the first photo, the Xiaomi Mesh System AX3000 may look luxurious depending on the lighting, but the plastic is thin and the molding quality is not good, so I think it is a cheap product when I actually saw it. At the bottom of the back corner, there are four ports for wired connections, one blue port for external Internet connection (WAN) and three ports for internal Internet connection (LAN). Next to the port for wired connection, there is a button used for mesh connection, a jack for connecting the charger, and a hole for resetting. The reset has a structure in which a thin pin must be inserted into the perforated area to prevent accidental pressing. I compared the size by placing it side by side with the existing Linksys mesh Wi-Fi router. It is about 1/3 the vertical length, and when viewed from above, it appears to be about twice the size in terms of area. It's a vertical model, so it won't take up much space, but it's high, so you need to install it where there's nothing hanging upwards. 2. Install Xiaomi Mesh Wi-Fi Router (Xiaomi Mesh System AX3000) There are two LEDs on the lower front corner of the router. The lower one is an LED indicating the status of the router itself, and the upper one is an LED indicating the status of the network. Each LED lights orange for in-progress status and turns white when complete. If you look at the bottom of the router, you can see the default SSID. Based on the 2.4Ghz SSID, you can see that the SSID ends of the two routers are different as a and b. It is recommended to use the router with a written as the master and the router with b written as the slave. When I installed it, I did the opposite, and I struggled for a long time because the mesh connection did not work well. Even if you put it in reverse, you can set it up, but if you put a as a master and b as a slave, the two routers are automatically connected when you connect the power without any special settings. You can install the app by taking a picture of the QR code in the manual. Instead of installing a separate app like Linksys, you install the Xiaomi Mi Home app and set it up within it. Since the router you purchased is a global version, you must use a language other than Chinese in the Mi Home app to enter the router setting function. If you have already installed and are using the Mi Home app, it may not be possible to enter the router settings screen depending on the set language. 3. Xiaomi Mesh WiFi router (Xiaomi Mesh System AX3000) speed measurement First, the environment in which the speed measurement was performed is described as follows. In the 24-pyeong space, the external Internet is connected to an ipTime router that supports gigabit in the 'room', and a 5-port gigabit switch hub is connected to the ipTime router. The main Xiaomi Mesh Wi-Fi router (Xiaomi Mesh System AX3000) is connected to the gigabit switch hub, and the second Xiaomi Mesh Wi-Fi router (Xiaomi Mesh System AX3000) is installed in front of the living room wall in front of 'Room 1'. The Internet connected to the outside is 100Mbps Internet, and the internal network connected by wire is all gigabit. When uploading/downloading a file from a PC connected by wire, download is about 110MBytes per second, and upload is about 100 to 80Mbytes per second. In the case of the Linksys router I used before, when I measured the transmission speed on the iPhone, it showed a speed similar to that of the Xiaomi Mesh System AX3000. Looking at the similar results even though the specifications of the two routers are different, it seems that the Internet speed measurement is closer to the external Internet speed measurement rather than the direct speed measurement between the Internet and the terminal. The following picture is the result of measuring the speed in the living room with a smartphone (iPhone 12 mini) connected to the Xiaomi mesh router. If there are no obstacles around and you are in close proximity, you will see low latency and transfer speeds that are close to the bandwidth of your external Internet connection. I measured the speed in each place marked in red except for the living room. Looking at the measured results, in the case of a space such as 'Room 1' where you have to pass through a thick wall, you can see that the latency rate increases, but the upload speed is 94Mbps and the download speed is maintained at around 78Mbps. Even if the obstacle is thin as a glass door, the delay rate is low in a space such as 'Veranda 1' where diffraction occurs, but the upload speed is 75Mbps and the download speed is 78Mbps. In the case of 'Room 2', the delay rate and speed were greatly reduced. When I measured the speed with the iPhone, I saw that there was no big problem in using all the bandwidth of the external Internet, so I used a 1GBytes file from my laptop to the NAS to check how fast it was when using mesh Wi-Fi at home. I tested the upload and download speeds. The two laptops used have a built-in wireless LAN card that supports WiFi 5 (802.11ac), and I tested the speed in the living room. The two laptops use different chipsets, but they support WiFi 5 (802.11ac), so they should have the same speed, but the actual results were different. A LAN card using a frequency of 80Mhz produces about 20MB per second, whereas a LAN card using a frequency of 160Mhz produces about 40 to 50MB per second. As in the title of the post, even if you have a wireless device that supports WiFi 5 (802.11ac), if you use a chipset that supports 160Mhz, you can see that the speed of both upload and download doubles. So, if the device connected to the router can use enough bandwidth of the router, you can experience twice the transfer speed just by changing the router. Among LAN cards that currently support WiFi 5, chipsets that support 160Mhz bandwidth include REALTEK's RTL8821CE and Intel's Wireless-AC 9560. If the wireless LAN card of your laptop or desktop is one of the two chipsets, you can see the effect of increasing the transmission speed just by changing the router. To check the chipset of the LAN card you are using, type “Start > Run > cmd” in Windows to open a DOS window, then type “ ipconfig /all | findstr description ” to check. 4. Xiaomi Mesh Wi-Fi Router (Xiaomi Mesh System AX3000) Review Conclusion The Xiaomi Mesh Wi-Fi router (Xiaomi Mesh System AX3000) has a large overall size, so it doesn't generate much heat. Probably, there are many empty spaces inside, so it is assumed that the heat dissipation is not good. While the Linksys mesh router can feel some heat when you put your hand on the top while it has been turned on for a long time, the Xiaomi product can feel a little bit of heat. If you look at the top of the Linksys mesh router that has been used for two years, you can see that the color has turned yellow due to heat, so you can see that it has been quite heated. In this regard, I think it is an advantage that the heat is low and the possibility of discoloration appears to be low even after long-term use because it is made of black plastic. Considering that it is a 2pack product, it is a good product in terms of price/performance because you can use a mesh router that supports WiFi 6 at a fairly affordable price. However, if your device supports WiFi 5 instead of WiFi 6, there may not be much difference from a WiFi 5 mesh router depending on the device. Compared to the Linksys mesh router, the installation process is a little more difficult, so it can be difficult to install, especially for those who are new to mesh router installation. Although the app supports it, it is not a walk-through format for setup. You can just think of it as allowing you to access and set up in a web browser in the app. Once the installation is completed and the two routers are connected via mesh, the menu itself is in English and there are many network-related terms, so it can be difficult to set up. I think one of the advantages is that it is easy to set up because there is no need to set up. Overall, I am satisfied with the fact that I can purchase two mesh routers that support WiFi 6 at this price, but there is no disadvantage except for the installation part. Unless another lower price comes out in the future, it might be the best budget mesh WiFi router for now. This post ends here. I hope the information covered in this post was helpful to those who needed it. #wifi #speed #2x #xiaomi #wifi6 #mesh #wireless #common #xiaomi #2x_speed #mesh #wifi

Reasons to buy Xiaomi Mesh System AX3000 Originally, I was using a Linksys Velop AC2600 Mesh WiFi router at home. It's been about 2 years since I bought it, and when I bought it, there were not many devices using Wi-Fi, but as the number increased, it was not a big problem when using only one or two devices, but when using multiple devices at the same time, the speed slowed down or buffering occurred. This is a problem caused by insufficient speed of the internal network, not the Internet. The main router is used exclusively for Internet and wired connection, and due to the bandwidth limitation of WiFi 5 (802.11ac) supported by the Linksys mesh WiFi router in charge of the WiFi of the internal network, It was a problem that occurred. So, as more devices are connected to WiFi, slowdowns or buffering occur, and mesh WiFi that supports WiFi 6 (802.11ax) with a wide bandwidth is needed. Routers that support WiFi 6 were very expensive in the early days, but recently the price has come down a lot. Of course, Linksys products were more expensive than other products even two years ago, and they are still expensive. So, while looking for a product that is inexpensive and supports WiFi 6 while supporting mesh WiFi, I bought the Xiaomi Mesh WiFi Router (Xiaomi Mesh System AX3000) 2pack product. For reference, I bought two products for $99.98 for mesh Wi-Fi configuration on AliExpress. In Korea, 1pack products can be purchased for about 60,000 won, so buying from Ali Express is a little cheaper. For reference, Linksys products with similar specifications are sold at a price of more than mid-400,000 won based on 2 packs. table of contents Box appearance of Xiaomi Mesh System AX3000 Xiaomi Mesh WiFi Router (Xiaomi Mesh System AX3000) Unboxed Xiaomi Mesh Wi-Fi Router (Xiaomi Mesh System AX3000) Components Xiaomi Mesh WiFi Router (Xiaomi Mesh System AX3000) Appearance "If you found this blog helpful, please leave a comment or like it" If you have any questions or inquiries regarding the content of the post, please ask in the comments and I will respond . box appearance In the past, the products purchased on AliExpress had different box designs and were of poor quality, even if they were from the same company. Seems to. The box of the Xiaomi Mesh System AX3000 also has a design similar to this design trend. The product's characteristic description is simply put on the front, and a large product photo is placed in the middle. Features and specifications of the product are printed on the back. On one side of the box, there is a phrase that lets you know that it is a 2pack product. At the bottom, it uses a 3-core Qualcomm processor and the description that it is a dual-band product is printed in multiple languages. unboxing The box is wrapped in plastic on the outside, so you need to remove the plastic. The cover can be opened by removing the vinyl and pulling the cover on the side to lift it up. When you lift and open the cover, you can see that a sponge is attached to the top to reduce shock. Inside the box, you can see that there are two routers side by side. If you pull up the paper printed with an arrow pointing upward in the middle, the router at the bottom will come up. If you take out the router at the bottom, there will be space to hold the router at the top with your hand. After removing the router from the box, you can see the router only by tearing off the adhesive on the top of the vinyl wrapping the router. After taking out all the routers, pull up the box on the right to remove the box containing the rest of the components. When you open the box, you can see that there are two adapters for power supply, precautions and manuals, and one LAN cable for wired connection.. Xiaomi Mesh Wi-Fi Router (Xiaomi Mesh System AX3000) Components The following picture shows all the components taken out of the box. Since it is a 2pack product, it contains 2 router bodies, 2 adapters, 1 Cat.5E cable for wired connection, and a multilingual user manual. The wired LAN cable included as one of the components is a CAT.5E standard cable. For reference, the maximum speed that can be transmitted with a CAT.5E cable is 1Gbps per second, which is 125 Mbytes per second when converted to commonly known Mbytes. The manual is in multiple languages, probably because it is a global version, but unfortunately there is no Korean. The manual is thick because it is in multiple languages, but there are not many actual explanations. The only thing worth seeing in the manual is how to connect to the router at the time of initial installation and explain the functions and features of each part. Xiaomi Mesh WiFi Router (Xiaomi Mesh System AX3000) Appearance The Xiaomi Mesh Wi-Fi router (Xiaomi Mesh System AX3000) has a simple overall design, and the corners are designed like heat sinks used to dissipate heat, and each side is flat. At the corner of the back, there are a button for mesh connection and four ports for wired connection. The blue port is for Internet (WAN) connection, and the other three are for connecting internal devices. There is a power connection port below the wired connection port and a reset hole below it. To reset, you need to press a thin pin like the one used to open the SIM tray into the hole. The material is plastic as a whole, but it doesn't feel luxurious when you see it reflecting in the light, perhaps because of the finish. I wondered if it might have been reduced in the thickness and material of the plastic to make a product with a lower price. At the top of the router, the same design as the heat dissipation fins at the corners of the four sides continues, and a hole is drilled between the heat dissipation fin designs, so that the heat generated inside the device is discharged through the hole at the top. Also, on the lower side of the flat surface, there is a hole in the middle of the same design as the heat dissipation fin, so that heat can be dissipated downward as well. There is a rubber packing on the bottom to prevent slipping, and the initial WiFi SSID of the product is in the middle. I'll talk about it later in the review, but in the case of a 2pack product, you need to install it by distinguishing the SSID below. In the next post, I will post the weight, size and user reviews of the product. This post ends here. I hope the information covered in this post was helpful to those who needed it. #wifi #speed #2x #xiaomi #wifi6 #mesh #wireless #common #xiaomi #2x_speed #mesh #wifi

Anker Soundcore Space Q45 white model review summary The Anker SoundCore Space Q45 headphones will be released mid-2022. At the beginning of the release, only black products were released, but a white model was recently added. This time, I'm going to review the recently released Anker SoundCore Space Q45 (White model) headphones. Anker SoundCore Space Q45 (Anker SoundCore Space Q45) To sum up my impressions of using headphones, it feels like a product that focuses on luxury and essential parts. If the soundcore life Q35, which was the previous work, had the feeling that I put everything in because I didn't know what I would like, the Q45 has the feeling that I focused on the main functions and made them good rather than putting them all in. So in some parts I am satisfied, but in some parts I am disappointed. The unboxing and appearance of the product can be found at the link below. able of contents Weight and Dimensions of Anker Soundcore Space Q45 White Model Anker Soundcore Space Q45 White Model Testimonials, Reviews "If you found this blog helpful, please leave a comment or like it" If you have any questions or inquiries regarding the content of the post, please ask in the comments and I will respond . weight and size I compared the case for storing headphones with the previous Soundcore Life Q35. The case of the Soundcore Space Q45 headphones weighs 194.6g and the case of the previous Q35 weighs 166.6g. The Q45 is made of artificial leather, and the previous one is made of suede, so it is about 30g heavier than the previous one. The weight of the headphones has also increased by about 30g compared to the previous Soundcore Life Q35. Perhaps the battery capacity has been increased to increase the playing time, or it has been increased due to an increase in parts or a change in material. So, if you carry it with a case, it will add about 60g in weight. The band size of the headphones is similar to the previous one, but the size of the unit has increased, so when you put the two products side by side, it feels bigger. Anker Soundcore Space Q45 White Model Testimonials, Reviews 1. Soundcore Space Q45 Appearance Review Although the color is different, it is easy to understand by comparing the improvement and the deterioration compared to the previous one, so I will compare it with the Q35 model I was using. As I mentioned earlier, the size of the headphone unit has increased, so it feels like the overall size has increased. And the surface treatment of the material, the change of the design, and the combination of colors give it a luxurious feeling. The hinge method has been changed so when the headphones are placed on the floor, the Q35 lays flat, but the Q45 lays flat on one unit, but tilts the other unit, making it difficult to lay flat. The reason why the headphones cannot be laid flat is that the hinge part has elasticity. The Q35 only has a structure that connects the unit and the band, but the Q45 has an elastic hinge at the top of the unit, so it serves as an auxiliary function to fix the headphones to the head with the band when the headphones are worn. The white paper connected to the unit has elasticity, so it has the advantage of increasing the fixing force when the headphones are worn, but on the contrary, when putting them in the case, the unit does not lie flat, which causes inconvenience to press when closing the case. One of the strengths of this product is that the structure of the hinge and band has changed, reducing the Yoda-like feeling when worn. When I wore the previous Q35, there was a lot of space between the headphone unit and the band, so I felt a lot like Yoda. The way the band is stretched is different from previous products. In the case of the previous soundcore life Q35, there is a part with a hole in the middle of the band, but the Q45 has been changed to a design with a groove cut in the band. Maybe that's why it feels a little more luxurious, and the sound you hear when you stretch or shorten the band is reduced and it works smoothly. Instead, it looks like it stretches to a similar length on the outside, but when you actually wear it, it feels like the headphones are small, perhaps because of the tension of the band. In fact, when both products are stretched to the maximum and worn, the Q35 feels like it is left over, but the Q45 feels just right, so it would be uncomfortable for people with large heads. The components are also slightly different from the previous work, but the connection jack that can be used in the airplane in the previous work is missing, and the pouch that can store the components is also missing. And the 3.5 pi wired connection cable was also a structure with one side bent at 90 degrees in the previous one, but it has been changed to a straight structure. The connection jack used in airplanes is not used in recent airplanes, so it doesn't matter much, but the part that excludes the storage pouch is thought to be for the purpose of reducing the cost, so it feels regrettable. On the left side of the unit, there are volume control and play/pause buttons, and next to it is a 3.5-pi connection jack. And at the bottom, there is a hole drilled through which I think the microphone will be. The volume button increases/decreases as one part, and the volume control and play buttons have intaglios on each button, giving it a luxurious feel. The volume button can be used to move to the previous or next song by pressing it for about 2 seconds. In addition to playing/pausing music, the play button can be used to answer or end a call when a call comes in, and can be used as a call rejection function when pressed for 2 seconds. In the previous version, the Q35, there is a protrusion on the volume down button among the buttons that control the volume, so you can easily know the button without looking at the button, but the Q45 lacks an intuitive feel when using it because there is no such part. There are many perforations in the part where the microphone is located, so it seems to be helpful for the microphone to pick up sound. On the right side of the unit, there is a USB Type-C port for charging, a power on/off button, and a noise canceling function button next to it. First, looking at the noise canceling button, basically, each time you press it, the function changes in the order of noise canceling > normal > listening to ambient sound. If you install the app, you can change it so that you can selectively use only the desired function. If you press the Power On/Off button for about 2 seconds, you can turn the power on or off, and if you press it for more than 5 seconds, it goes into Bluetooth pairing standby. The Q45 is capable of multi-pairing, so you can connect two devices. If you click the power button continuously while connected to one device, you can connect to the other device. I looked at all the buttons on the right unit, and one function on the right unit, which was in the previous Q35, was missing from the Q45. What's missing is a touch function that allows you to change the noise canceling function by placing your palm on the outside of the unit. When I urgently turned on or off the noise canceling function, I could easily change it without having to find a button and fumble, which was a very useful feature, but for some reason the function was missing. The hinge part is a structure that goes inside the unit, and it has a design similar to other headphones that have recently come out, and thanks to the structure and material, it gives a luxurious feeling. Although it uses a hinge structure similar to other headphones, it can be folded like the previous one, making it easy to carry in a bag. The headband part feels a bit thinner than the previous one, and the material used inside the cushion has changed, so it goes in smoothly, but it's too deep, so it's unfortunate that you feel pressure on the top of your head when you wear it. Inside the unit, L and R are printed to distinguish the left and right as in the previous product, and the ear cushion part is much softer than the previous product and feels similar to memory foam, so it feels much more comfortable when worn. And since the unit itself has been enlarged, the space inside is also wider, so people with large ears can wear it comfortably. 2. Soundcore Space Q45 App The Q45 has more functions that can be set through the app compared to its predecessor. In the previous product, except for firmware update and equalizer setting, there were no functions of the headphone itself that could be set, but this product has quite a few features, such as button function setting, noise canceling method or strength change, and maximum volume limit function to protect hearing. function can be set. And the fact that the menu of the app has been organized so that you can set the function in just two steps is also a good thing. 3. Soundcore Space Q45 Sound The price is higher than before. However, since its launch, discounts have been continuously held through events, so if you buy it at a discounted price, it is one of the products with a high price-to-price ratio. I think it will be a good product. When you apply the Soundcore signature equalizer and listen to music, it sounds very different from the Q35. In the case of the Q35, the bass is basically emphasized, but in the case of the Q45, the bass is not booming like the Q35. Instead of feeling like the amount of bass has been reduced, it feels like the bass has become tight and punchy. If the Q35's low-pitched sound is expressed as "doo-woong", the Q45's low-pitched sound can be expressed as "doo-woong". The punchy feeling of the bass part has been strengthened and the amount has been reduced, but instead, the overall sense of space is widened, giving a cool feeling. In particular, when I listened to the vocal part, I was able to get the feeling that it was heard in a wide space. If you look at Anker's sound equipment, it tends to give a lot of bass-emphasized sound, so if you liked Anker's low-pitched sound, you may be disappointed. became. When you activate the BaseUp function, you can feel that the amount of bass is greatly increased, just like the Q35. The amount of bass is increased, but the punch is maintained, so you can hear a different bass than the Q35. Instead, not only the volume of the bass part is heard, but the vocal sound also increases. If you listen closely, the sound is not just increased, but it seems that the sound has increased as the sense of space has decreased compared to before turning on BaseUp. In the treble, I was able to give a feeling similar to Sony's WH1000X series, but on the other hand, I feel that there is still a long way to go because the punchy feeling of the bass is saved and the amount is reduced. Even if you use BaseUp, it would have been perfect if you could maintain the sense of space before turning it on, but it was a bit disappointing that there was no middle. Instead, I think it's a good part in that it can satisfy both those who want the big bass of the previous Q35 and those who want a wide sense of space even if the bass is weak. Every time Anker releases headphones, it's a little bit, but seeing that they are gradually improving, I think they can show a little better in future products. If you have the previous Q35, it is a product that does not necessarily need to be changed. Anyone who has the previous Life Q20 or Q30 or earlier models will be highly satisfied when switching to this product. This post ends here. I hope the information covered in this post was helpful to those who needed it. #anker #soundcore #space #white #white #Q45 #appearance #weight #size #reviews #review

Anker Soundcore Space Q45 White Model Unboxing Summary Anker, which I added as a channel to KakaoTalk, was also notified that a year-end discount product would be released, and since I could only buy Space White Edition on Naver Shopping Live, I made an impulse purchase. What we're going to look at this time is the white model of the Anker SoundCore Space Q45 headphones among the components included in the Space White Edition. I thought it would be a different color from the regular white model because it was included in the space white edition, but in the end it was the same color as the regular white model. The color is a mixture of white plastic and silver, and the silver is a light color, so I think the whole is white, and it gives a luxurious feeling. The box has a slightly larger size than the previous Q35, and the design is similar to the previous one. The components are the same except for the missing connection jack that can be used in the aircraft that was in the previous Q35. table of contents Anker Soundcore Spave Q45 Box Dimensions Anker Soundcore Spave Q45 unboxed Anker Soundcore Spave Q45 White Model Components Anker Soundcore Spave Q45 White Model Appearance "If you found this blog helpful, please leave a comment or like it" If you have any questions or inquiries regarding the content of the post, please ask in the comments and I will respond . box appearance The box has a slightly larger size than the previous Q35, and the design is similar to the previous one. On the front, a picture of the product, the model name, and a phrase emphasizing the main feature of the product, the noise canceling function and extended usage time, are printed. Printed on the back is a description of the product's key features, including adaptive noise cancellation, reduced noise reduction, 50 hours of playtime, and improved call capabilities with two microphones. On the side, the phrase "Sound loved by 20 million people around the world" and the fact that the product's noise cancellation has been strengthened and has been certified by SGS are printed on the side. At the top, there is a plastic that can be hung when displaying the product, and a sticker with the serial number of the product printed on it. At the bottom, various certification marks of the product, company address and composition are printed. unboxing The box of the Anker Soundcore Space Q45 headphones is wrapped in vinyl just like the Q35 before it, so you have to tear the vinyl to open it. After removing the vinyl, hold the upper box and shake it gently, and the lower box will come off, allowing you to take out the product. Inside the box, there is a case for storing headphones, and when you take out the case, the manual is fixed in a grooved place at the bottom. If you open the zipper of the case, you can see the components. The way the headphones are fixed is the same as the previous Q35, which is the same as Sony's noise canceling headphones, the WH1000XM4. Inside the case, the charging cable and the 3.5 pi gold-plated cable used for wired connection are placed on one side, but the pouch for the cable that was in the Q35 is omitted. Anker Soundcore Space Q45 White Model Components Except for the manual, all components are included in the storage case. It is the same configuration except for the missing connection jack that can be used in the aircraft that was in the previous Q35. The components are a storage case, a 3.5 pi gold-plated cable for wired connection, a USB Type-A to Type-C cable for charging, manuals and precautions, and the headphone body. The manual is foldable and organized in such a way as to have one picture and explanation per page. There is one explanation per page, and it is explained in multiple languages, but there is also Korean. Anker Soundcore Space Q45 White Model Appearance The case of the Anker Soundcore Space Q45 headphone white model is the same white as the headphone color. Unlike the Q35, which was a suede-like material, the case is made of softly coated artificial leather. As will be covered in the review, the weight of the case has increased slightly due to the change in material. The matte white faux leather case has a luxurious feel. The case can be opened and closed using a zipper. The Soundcore logo is engraved on the zipper as well. The case also has a small handle to hang your fingers on. The outside of the headphone unit is white on the inside, the rim is made of silver plastic, and the logo of the shiny silver soundcore is engraved in the center. On the bottom of the right unit, there are play, volume up/down buttons and a jack to connect a 3.5 pi cable. Beneath it is a hole drilled into what I believe will be the microphone highlighted on the box. At the bottom of the left unit, there is a USB Type-C port for charging, a power button, and a noise canceling toggle button. The lower part of the white paper is silver, and what was connected to the outer rim in the previous work is retracted inside the unit like the Sony WH1000XM5. And unlike the Sony WH1000XM5, the way the unit can be folded remains the same. The white paper part that connects to the unit is the same silver color used for the frame, but it seems that aluminum is used instead of plastic. The head cushion is composed similarly to the previous one, but it is a little thinner and a little softer than the previous one. L and R are printed on the inside of the unit to distinguish left and right, so you can easily distinguish left and right. The design of the product is generally similar to the previous Soundcore Life Q35 model, but partially changed. Most of them have changed in a better way compared to the previous one, but one unfortunate part is that the head cushion part is thinner than the previous one, so it seems to put pressure on the head when worn. This post ends here. I hope the information covered in this post was helpful to those who needed it. #anker #soundcore #space #white #white #Q45 #unboxed #components #appearance #weight #size

The product to be introduced this time is an HDMI splitter/selector product from Baseus that supports 4k. I bought it from aliexpress (https://www.aliexpress.com) and the regular price is $12.74 when the set includes an HDMI cable, and it can be purchased at a slightly lower price depending on sales or coupons applied. You can also purchase it on Naver Shopping, and if you shop directly, you can find the product by searching for " baseus 4k hdmi switch " on Ali Express. However, the price sold on Naver Shopping is at a high price on Ali Express, and while I am receiving a separate shipping fee, I have recently been discounting it with Kongdon Daecheop, so I can purchase it at less than half of the price sold in Korea, so I can buy it directly. If you can, there is no reason to buy domestically. The function itself as an HDMI Switcher is rather simple, but it can be used in two ways. You can connect two laptops or desktop computers to one monitor and use them interchangeably, or connect two monitors to one computer and use them interchangeably. The latter function is more suitable for use when connecting multiple devices such as a console game console or set-top box to the TV in the living room, rather than for connecting a computer, due to insufficient HDMI ports. I have two desktop computers in my room, only one monitor and only one HDMI port, so I bought this to use to connect two computers alternately. Before I start the whole content of this post, here's a brief summary of my experience. This was very useful when my monitor only had one HDMI port and I needed to connect two computers. And now it is discounted, so it is cheaper than the purchase price of $12, but compared to the price at the time of purchase and compared to other products sold in Korea, it is a product with high price merit. Because it has a small size, it occupies a small area even if it is placed on a desk or TV shelf, and it is light in weight, so I thought that it would not be too much of a problem to use it by attaching it to one side of the TV using double-sided tape, etc. It can be used for two purposes, so it is satisfactory as a function, but if you do not read the manual carefully, you may get hard during the installation process. Unboxing Recently, the box design of Baseus products seems to be somewhat fixed. In the past, there were some that had different designs depending on the product, but whether it was to save production cost or not, regardless of the type of product, they had a similar design configuration. The product's photo and model name are printed on the front side, and the product's installation picture and specifications are simply printed on the back side. On the side, some features of the product are marked with icons. This is the HDMI cable I bought as a set. It is made of slightly thick vinyl, the front side is transparent so that the product can be seen, and the back side is opaque so that you can check the printed specifications or certification mark. Open box There is no separate sealing seal, so if you open the top cover, you can take out the plastic blister containing the product. At the bottom of the blister is a folding manual unique to the product Baseus. The product is held firmly inside the blister, so you need to apply some force to pull it out. The HDMI cable is packaged in a zipper bag, so you can take it out by opening the top left and right. Components The components have a composition that can be seen a lot in Baseus products. The product body, warranty card, manual and unidentified stickers are everything. The following picture is the manual of the Baseus Matrix HDMI Switcher. The manual has 5 sides each on the front and back, and it is in the form of a folding manual. One side of the manual is in English and the other side is in Chinese. The HDMI cable purchased as a set comes with only the warranty card without a separate instruction manual. Appearance The product is entirely made of dark gray aluminium. The manufacturer's name is on the top, and there is a black square switch button used to change the output or input device. The model name and various certification marks are engraved on the bottom. There are three HDMI ports on the front, and INPUT, OUTPUT2, OUTPUT1 are labeled below each port. Each mark is not printed, but the inside of the plastic is painted black, and only the letters are not painted, so there is no need to worry about erasing it. It has a clean look with nothing on the back. Specifications (weight, size) It can be seen that the weight of the product is 40g, which is quite light, and when you actually listen to it, you can feel that it is quite light. The width of the product is 73.7mm, the length of the front and back is 32.0mm, and the thickness is 13.0mm, which is quite small. When you look at the shape when you hold it in your hand, you can clearly feel that it is smaller than the measured figure. 사용후기 On the front, under the three HDMI ports, INPUT, OUTPUT2, and OUTPUT1 are marked, but INPUT does not unconditionally perform the INPUT function, but also operates as an OUTPUT function depending on the method used. At first, I installed it without looking at the manual, but it was not set as I wanted, so after wandering for a while, I can finally set it up properly only after checking the manual. If it is difficult to read the manual in English or Chinese, or if you do not want to read the manual, you can install it by following the instructions below. When there is only one device to output the screen, such as a monitor and a TV Turn on the monitor or TV and connect the HDMI cable. Connect the HDMI cable connected to the monitor or TV to the port labeled INPUT. Connect the cable connected to one of the devices (computer, set-top box, etc.) that requires output to the screen to the OUTPUT1 or OUTPUT2 port. Connect the remaining devices (computers, set-top boxes, etc.) to be connected to the HDMI splitter to the remaining HDMI ports. When there are two devices to output the screen, such as a monitor and a TV Turn on the device to be connected to the monitor or TV and connect the HDMI cable. Connect the cable connected to the device (computer, set-top box, etc.) to the port labeled INPUT. Connect the cable connected to one of the devices (monitor, TV, etc.) to output the screen to the OUTPUT1 or OUTPUT2 port. Connect the remaining output devices (monitor, TV, etc.) to the HDMI splitter to the remaining HDMI port. After the connection is complete, if you press the button on the top, the number displayed on the LED on the front changes to No. 1 and No. 2 each time you press it, and the output of the connected equipment is switched accordingly. As long as you don't experience difficulties during the installation process, the features aren't complicated and it's not difficult to use. The price is cheap, the material is made of aluminum, and the finish is good, so it does not feel like a cheap product. There is also an LED on the front, which you thought would be nothing, so you can intuitively know the operating status of the product. There are no separate attachments for attachment, but since it is light in weight, there seems to be no problem to attach it to the back or side of a monitor or TV without placing it on a desk. It can be used for two purposes, so it is a satisfactory product in terms of function. If you read the manual and install it, it's not a problem, but since there's no particular part that can be called a disadvantage, I forcibly picked it as a disadvantage. This post ends here. I hope this has been helpful to those who needed the information covered in this post. #baseus #aliexpress #4k #hdmi #switch #unboxing #appearance #specs #reviews

Ulanzi Extendable Tripod (Ulanzi MT-08) Review Summary In this post, the specifications and user reviews of the Ulanzi MT-08 following the last unboxing. First of all, to summarize my experience while traveling for a few days, it was light in weight and easy to carry around, and I was able to use it quickly because it was not connected by turning the power on like a typical gimbal. And when the stick is extended to the maximum, it has a shorter length than a normal selfie stick, but I felt it was long enough unless I had to take a lot of people. The only disappointing thing is that it is a bit expensive compared to the price you can buy from Ali Express, and other than that, it is a satisfactory product. If you are curious about the appearance or components of the product, click the link below to view more details. Table of Contents of Ulanzi Extendable Tripod (Ulanzi MT-08) User Reviews product specification Reviews Specifications of Ulanzi Extendable Tripod (Ulanzi MT-08) The length of the Ulanzi Extendable Tripod (Ulanzi MT-08) when folded is 147.9mm, and the diameter of the handle is 30.2mm. The thickness of the handle felt like it was just the right thickness, neither too big nor too small when I held it in my hand. The length of the smartphone holder (Ulanzi ST-07) is 76.8mm, the width is 36mm, and the thickness of the front and back is 24.5mm. The width of the inner hole for fixing the smartphone is 9.6mm, so if the smartphone is covered with a case, there is no problem in fixing it. Even if the case is thickened by attaching it, the fixing power is strong, and there is no fear of it falling off because the rubber on the outside catches it. When the smartphone holder is attached, the minimum length is 22.5cm, and when the rod is extended to the maximum, it is about 35cm. The weight of the Ulanzi extended tripod (Ulanzi MT-08) itself is 93.2g, and the weight of the smartphone holder (Ulanzi ST-07) is 28.9g. It has a weight that is not burdensome for shooting. Ulanzi Extendable Tripod (Ulanzi MT-08) Reviews, Testimonials The picture below compares the length of Xiaomi's selfie stick when it is extended to the maximum, and you can think of it as having a length that is about 1/3 of a normal selfie stick . In terms of relative length, it may feel short, but in actual use, it felt that it was sufficient length, and I thought that it was an appropriate length in terms of inflicting damage to the surroundings even if it was extended to the maximum. This is a picture of the smartphone standing on a tripod while it is mounted. The tripod does not require a lot of space when unfolded, so it is good to place it in a narrow space, and it can stand stably even when tripod is extended to the maximum unless there is strong wind. This is the view when the bar is extended to the maximum with the smartphone attached. Because the length of the bar is short, even when it is extended to the maximum, there is little feeling that the weight is shifted forward. The smartphone can stand up to 90 degrees, so it looks good enough for selfies or vlogs, unless you need to use it at an extreme angle. The fixing power of the ball head is also good, and the weight of the smartphone does not loosen the fixation of the ball head. The part that can bend the ball head up to 90 degrees is only possible with the part with a groove on the bottom of the ball head. It seems to have been designed in consideration of the case where the lock is loosened from side to side due to the shift of the weight, and there is no case where the ball head rotates due to the weight of the smartphone. if you don't rotate hand. The fixing tension of the smartphone holder (Ulanzi ST-07) is very strong . However, when the fixing part is extended, when you look at the back, the inside is empty, and it is not thickly molded, so I had a feeling that it might break. It 's fine right now, but it felt like it could break if the durability of the plastic deteriorates after using it for a long time. The following is a state in which the smartphone is placed at a 90 degree angle and the tripod legs are spread out. Because the length of the rod is short, it cannot be used for product photography, but it seems that the stability of the tripod is good in that it can withstand the tripod without being knocked over. Although the weight of the smartphone used in the test is 186g, it is a light model, but it seems to be able to withstand the weight of the smartphone when the tripod is unfolded unless it is placed at such an extreme angle, such as when taking a product review photo. It is a pity that this product was purchased at a domestic shopping mall and was a bit disappointing in terms of price and that I was worried about the durability of the smartphone holder. In addition, during the 10-day trip, the length of the rod was short, so there was no effect of shaking due to the good fixability of the rod even when shooting video. In addition, the fact that it can be carried without burden in terms of portability due to its light weight was also considered to be quite advantageous compared to gimbals that generally weigh 4~500g. If you want to shoot a light vlog or need a sturdy selfie stick, I thought it would be a good product. This post ends here. I hope this has been helpful to those who needed the information covered in this post. #travel #replacement gimbal #tripod #extendable #ulanzi #specification #review #review #travel #tripod #extend #ulanzi #specs #reviews

Reasons to buy Ulanzi Extendable Tripod (Ulanzi MT-08) What I will post this time is that I was planning to shoot some videos with my smartphone while traveling, and I thought I needed a tripod that could shoot with my smartphone standing up, so I considered a stand that can be mounted on a gimbal, but I think the weight of the gimbal is too heavy. Normaly weighs of gimbal about 500g, it is not only carried for a day or two, but it feels burdensome on a schedule, so it is an extended tripod from Ulanzi that I found while looking for a product that can be used for multiple purposes and has a light weight. I bought it to use as a tripod, selfie stick, and gimbal substitute while carrying it lightly because it was too heavy to carry a gimbal when traveling. You can make a purchase on aliexpress. Ulanzi is a Hong Kong company that manufactures vlog products, mainly manufacturing and selling gimbals, tripods, and lighting devices. So, I thought it wouldn't be bad in terms of product quality. As you can see from the appearance and user reviews, it is a product with an emphasis on portability, so even when stretched to the maximum, the length is rather short. However, as recent smartphones support wide-angle or ultra-wide angles, I thought it would be a good way to use it as a selfie stick. I bought it as a substitute for a gimbal, but it does not have a function to prevent shake like a gimbal. Contents of Ulanzi Extendable Tripod (Ulanzi MT-08) Unboxing Review Ulanzi Extendable Tripod (Ulanzi MT-08) Box Appearance open the box Components product appearance Ulanzi Extendable Tripod (Ulanzi MT-08) Box Appearance The box design has a simple overall design. The material of the box looks a cheap , but considering the price of the product, I don't think it's bad. The holder for fixing the smartphone is in a zipper bag to make sure there is no problem even if it receives a special shock. On the front of the tripod box, the Ulanji company name is printed on the top, a picture of the product in the middle, and the model name of the product on the bottom. On the side, the model name and color of the product and description of accessories for vlogs are printed. On the back, there is a picture of the product when the legs are spread out and a brief description of the manufacturer. The front of the packaging of the smartphone holder is transparent, so you can see the product, and on the back, a brief description of the company is printed similar to the one on the back of the tripod box. Unboxing Ulanzi Extendable Tripod (Ulanzi MT-08) You can take out the product by opening the cover on the top of the box. There is no separate sealing seal, so the product can be taken out easily. The tripod (Ulanzi MT-08) inside the box is wrapped in plastic and is not sealed with tape, but you can take it out by opening the plastic bag. The packaging of the smartphone holder (Ulanzi ST-07) also does not have a separate sealing seal, so if you open the top of the zipper bag, you can immediately take out the holder. Components of Ulanzi Extendable Tripod (Ulanzi MT-08) There is no separate manual for how to use it because it is simple. So, all the components are a tripod and a smartphone holder. If you are using a tripod for the first time, you may not be familiar with the ball head, so I thought it would be good to have a simple manual. I thought that it would have been nice to have it printed on back. Appearance of Ulanzi Extendable Tripod (Ulanzi MT-08) The overall design of the product is rather neat. The color I bought is white, but I know there is a black model, and in the case of the black model, the ball head is red. The material of the tripod is matte plastic, and the grip part of the hand is slightly treated to prevent slipping. Just below the ball head of the tripod is a lever for fixing or releasing the ball head, and above the ball head is a screw of a standard standard used to fix the camera. When you open the handle, you can see that there is a rod that can be expanded into 3 stages inside. The inside of the tripod leg is empty to accommodate the folded rod, and the part used as the tripod leg is made of rubber to prevent slipping. The following picture shows the smartphone holder (Ulanzi ST-07). There is a screw hole for fixing to a tripod, one at the back and one at the bottom, so it is configured in consideration of the convenience of shooting. If the weight of the smartphone used is heavy, it may fall over when the ball head is bent 90 degrees, so this seems to have been taken into account. On the top, there is a holder in the form of a hot shoe to fix a microphone or lighting sold as a separate accessory. is attached. Below is a picture of the smartphone holder mounted on a tripod. The ball head can be rotated 360 degrees, so you can use it by rotating it in the required direction after fixing the cradle firmly. The length of the selfie stick is rather short, but when the smartphone holder is attached, it has a slightly longer length, so it will be okay to put it on the desk and use it for self-video shooting. The following will cover the specifications and user reviews of the product. Please look forward to user reviews and reviews. This post ends here. I hope this has been helpful to those who needed the information covered in this post. #travel #replacement gimbal #tripod #expandable #ulanzi #box #appearance #opening machine #components #unboxing #travel #tripod #extend #ulanzi #appearance #components #unboxing

Chewable coffee that can be eaten on the go, Koba Coffee Bar and Litos Coffee Chews In general, when it comes to coffee, it is common to drink it using a drip method or a capsule machine. However, when I went to Yongsan CGV, I came across a different coffee product sold at a pop-up store. The product name was Littos Coffee Chews, and it was made like candy so that you can eat coffee while carrying it. It was also a different way from the usual way of eating, and it looked easy to carry as it was contained in a small tin case. I was able to try out the products sold at the stand, so I tried two types. Since they were made in candy form, it would be difficult to eat if only coffee was included in a small size, but it was not difficult to eat because of a little bit sweet taste. When I came back home and looked for information about the product, I was a little surprised to find out that the person selling it at the stand was the CEO of COBA. I found out while looking for information, but there were products developed and sold by COBA Korea, but the products in the tin case were imported and sold by a company called Littos from New Zealand. I bought a Littos coffee chews because it was packaged in a tin case like the mini candy sold at places like Starbucks, and Littos looked good in terms of portability. Contents of the post Comparison of COBA coffee bar and Littos coffee chews Littos Coffee Chews reviews "If the content of the blog was helpful, please like or comment" If you have any questions or inquiries regarding the contents of the post, please ask in the comments and we will answer them . Comparison of COBA coffee bar and Littos coffee chews Among the products sold at the pop-up store, the ones that can be eaten on the go are chocolate-like coffee made in the form of a bar made by Kova Korea, and Littos products imported and sold in the form of candy in a tin case. There were two types of coffee. Each COBA coffee bar is individually wrapped, and it is in a bag, so if you want to carry it individually, you will need a bag or a jacket with pockets. On the other hand, Littos coffee chuu has a small tin case and can be carried in a trouser pocket, so in terms of portability, it looked better than the Koba coffee bar. < Comparison of COBA coffee bar and Littos coffee chew > In the case of COBA, one pcs contains about 1/2 the amount of caffeine of one cup of coffee, so if you eat two pcs, you can consume the amount of caffeine for one cup of coffee. Also, since it is similar to a chocolate bar, you can put it in a bag and carry it with you, but it will melt if a certain amount of heat continues. The price that was sold at the pop-up store was 56,000 KRW for 20 pieces, but if you look at what is being sold on Naver Shopping, there are also 10 pieces. In the case of Littos, it is said that one tin case of candy contains the amount of caffeine for one cup of coffee. It's in a tin case, so it's good to carry individually, and it's in the form of a small candy, so you can eat it little by little, so I thought it'd be better than a COBA coffee bar to eat while on the go. The price that was sold at the pop-up store was 13,200 KRW for 4 tin cases, and although they were not sold individually, you can purchase them individually, although delivery costs will be included in Naver Shopping. You just have to buy it, try it, and then buy only the kind that suits your taste. Littos Coffee Chews reviews Littos coffee chews are not made in Korea, but are made by Littos, a New Zealand company. Although it was sold at the pop-up store of COVA Korea, the actual importer in Korea is elsewhere. So, there are several places in Naver Shopping, and there are also open markets that sell overseas purchases. While Coba's coffee bar has only one flavor, Littos' Coffee Chews has four different flavors. Among them, I tried two types at the pop-up store: double espresso and chocolate mocha. The double espresso was so bitter that it felt more like I was eating granular coffee rather than eating candy. And in the case of Choco Mocha, I personally liked Choco Mocha more because I could feel the bitterness of coffee and slightly sweet taste of mocha coffee. I haven't tried it, but I've been told that ice mint doesn't taste like mint, but rather sweetened mint candy. The price sold at the pop-up store was 13,200 KRW for 4 tin cases, but you can purchase it for about 3,000 KRW per tin case at Naver Shopping or the open market. In the case of overseas purchases, there are some places that sell them at a lower price, but the shipping cost is about 10,000 KRW, so it is much cheaper to purchase as it is delivered domestically. One tin case contains 25 candies, and although they are called candy, they are softer than regular candies or caramel and slightly harder than jelly. Put it in your mouth and it will start to melt after a while, and it doesn't feel stuffy, so you can take it with you and eat it lightly. This post ends here. I hope this has been helpful to those who needed the information covered in this post.

A summary of the experience of visiting Beauty Garden, which was good value for money with tender meat and generous composition Due to the situation in the last two years, the number of times I meet with friends has decreased considerably, and I was sorry that social distancing restrictions were gradually relaxed. It is difficult for a friend to go with me, so I searched for a place near Suyu Station to go, and I looked for a place that sells meat but where you can eat comfortably. Fortunately, I found a place that meets the conditions, and it is a beauty garden that can be reached by walking only 300 meters from Suyu Station (Subway Line 4). Although it is not far from Suyu Station, it is not on the roadside, so it can be a little difficult to find if you are not good at finding alleys. If it is difficult to find the store in the alleyway, I took pictures of the way below, so if you look at the pictures below, it will be of some help. The interior of the store was generally warm, and the food was good. If you order a set menu, it is a reasonable amount, so if you have a hard time choosing a menu, we recommend that you order a set menu that corresponds to the number of people who visited without worrying about it. It's not unfriendly, but there are people who are not friendly and there are people who are quite friendly, so depending on the person serving, you may like or dislike the service. The taste is not bad, but considering the amount of meat included, the price is not cheap. When looking at the price of a single item, it is higher than the price for a typical pork portion, so if you order it separately, it may cost more than you think. Then, based on my experience of going to Beauty Garden, I will start reviewing the menu and how to get there. How to get to Beauty Garden For the route from Suyu Station on Subway Line 4, you can use the directions on your phone by looking at the photos taken below or by clicking on the map image. Beauty Garden is located within a 5-minute walk from Suyu Station (Subway Line 4). If you click on the map image below, you can find directions with the map app. When you get off the subway, go to exits 7 and 8. After turning left in the direction of exit 7 or 8 Go to exit 7 on the left. After going up the stairs to exit 7 Go straight about 20m in the direction of the exit, Turn right into the alleyway. Follow the road down about 80m. Even if there is an intersection in the middle, do not worry and go straight past the intersection. After passing the intersection, go straight for about 90 meters. Go into the alley on the right at the three-way intersection where you can see Myeongnang Hot Dog. After entering the alley, go straight for about 80 meters. You can see the Beauty Garden in front of the end of the road you were going straight ahead. This is what it looked like when the sign was turned on in the evening when I first visited. Beauty Garden's menu pork ribs, pomegranate marinated ribs The food we ordered is a set menu for two. The set for 2 includes 2 servings of pork ribs, 1 serving of seasoned pomegranate ribs, and 1 serving of clams miso soup. Each dish is sold individually, but it is cheaper to order a set that matches the number of people in terms of price. Pictured below is the basic configuration on the table. A front plate, chopsticks, spoon and a paper cup for drinking are set on the table, and water is brought. This is a side dish that comes out when you order the set menu for two. When I visit again afterward, even when 3 people go and order a set for 3 people, it has the same composition, so the side dishes don't seem to change depending on the menu. The pictures below are when I ordered a set for 2 people. It is served in a rectangular iron pan, and in addition to the meat, it contains corn, sausage, shrimp, and various vegetables. Even when I ordered it as a 3-piece set, there was only a difference in the amount of the same composition. Judging from the reviews posted in other places, it seems that the first time you order it, it is cooked from then on, so it came out warm overall. It seems to have changed to a method that cooks first and then heats it up when you order it, probably because there are a lot of customers now. So, looking at reviews from people who visited the store in the early days of its opening, it seems that the reviews are not very good. However, it wasn't bad because it came out warm enough to feel the warmth, and after eating it for a while, it could be reheated on a gas stove. You can think of clam clam soybean paste soup as soup with soybean paste. Basically, it tastes close to miso soup and contains clam and rice, so it is a snack that people who drink soju will like. It has a slightly pungent taste, so it feels like you can neutralize the greasy taste of eating meat. However, the size of the ttukbaegi is not large, and it feels like there is not enough rice in it, so it was a bit disappointing to see only the amount. If you look at the second page of the menu, they are sold separately, and the price is 10,000 won. The amount that comes out is not much different from what is included in the set, so it is better to ask for a lot of rice when you first order. beauty garden menu The menu board has three printed sheets of paper pinned to the clipboard. After my first visit, I visited again and the menu design was different from the picture below. When I looked at the menu boards with different designs, they looked so different that I was mistaken for the price or the missing menu because the composition was different. (Of course, after looking at it slowly again, I found out that nothing has changed.. 😉) There are not many kinds of menus, and the letters are printed in large letters to make it easy to read. But because of the clip fixed at the top, it was inconvenient to see the pages one by one. The menu sold as a set on the second page is also sold individually, so you can order and eat what you want. However, if you calculate the amount, it is cheaper to order them as a set rather than individually. Beauty Garden shop information business hours are Monday, Tuesday, Wednesday, Thursday, and Sunday from 12:00 to 23:00, Friday and Saturday from 12:00 to 24:00. In front of the store entrance, there are chairs that can wait when there are a lot of people. There is an awning above, so even if it rains, you can wait without getting hit by the rain. Inside the store entrance, there are chairs that can sit and wait for about 3 people in front of the counter. In the photo below, you can see the entrance to the kitchen on the left, but it is not an open kitchen. At the entrance to the kitchen, wines from the store are displayed. In the middle of the shop, there is a long table that can be used as a group seat as shown in the photo below. Currently, due to social distancing, partitions are processed in units of 4 people, but once the distance is lifted, it seems that it will be possible to accommodate a group visit. The interior uses a low color temperature lamp as if using an incandescent lamp, giving it a warm feeling. The photo below shows the Han Chinese wall inside the store. The wall is decorated with bricks, and the interior is decorated with paintings and neon signs on the wall. Visiting Beauty Garden You can't go without alcohol when you eat meat, right? So, I ordered a bottle of beer and soju with a mouthful. There are condiments and side dishes for eating meat and shrimp, so you can eat them in a variety of ways. You can eat it with a seasoning that looks like ssamjang, or you can eat it with chives or vegetables. The meat is seasoned to some extent, so you don't need to eat it with salt. You can think of the taste as sweet and salty like seasoned pork ribs with soy sauce and sugar. At first glance, sake looks like miso soup, but if you put a spoon deep in it and open a spoonful, you can see that there are clams with the rice as shown in the photo below. Zucchini, tofu, and cheongyang pepper are also included, so I thought it would be a good combination to eat with meat. This is a picture after two people ate a lot, but there was hardly any left except for the seasoning. If you order a set of 2 and eat it, it means that it is just the right amount for two people to eat, right? Serving can feel different depending on the person serving, so it is better not to go expecting friendly service. This is a place I visited twice because of the kindness of the person who greeted me on my first visit and the food of good taste. The taste of the food is good, but the price is a bit on the high side, so if you want to eat a lot at a reasonable price, it's a vague place, but I think it's a good restaurant if you don't care too much about the price. There are a lot of customers, so if you don't visit early (between 5 and 6 in the evening), you may have to wait, so it's a good idea to plan your visit.

For more information about the product's unboxing and components, please click the link below. Specifications, weight and size The weight of the product including the pouch is about 478g. The weight includes the charging cable and the in-flight connection jack in the pouch, so it will be a little lighter if you exclude those components. When only the weight of the headphones is measured, it is about 270g, which is similar to the weight of the recently released other wireless headphones. When the slide of the band is extended to the maximum, the left and right length is about 19cm. When the slide of the band is extended to the maximum, the upper and lower length is about 21cm. The left and right and top and bottom lengths are rather large, so the feeling of pressure when wearing it seems to be less than that of Sony products. When the slide of the band is reduced to the maximum, the vertical length is about 19cm. product comparison I compared it with the Sony WH-1000XM4. The size of the box is slightly larger than that of Sony products, and the thickness is rather thick. If you look at the state of putting the product in the pouch, Sony products are packed full and small in size, whereas the Soundcore Live Q35 product has a lot of empty space, so the size or thickness of the pouch is rather large. (But considering the price, I think it's great. It's less than 1/3 the price.. 😁) The outer material of the pouch is made of fabric for Sony, and the material for the anchor is suede. Both materials are good to the touch, so it seems that likes or dislikes will differ depending on personal preference. In the picture below, the Anker's pouch is on the left, and the Sony pouch is on the right. I measured the weight with all the components and products in the pouch. Anker weighs about 478g, and Sony weighs 447g, so Sony has a slightly lighter weight. However, since there is only a difference of about 30g, I don't think there is a big difference in portability. In the picture below, Anker is on the left and Sony is on the right. The weight of the product is 270g for Anker and 250g for Sony, which is about 20g different from headphones. This is the appearance when the product is folded. As for the folding method, both products adopt a similar method, so the shape when folded is similar, but I feel that the Sony side folds more densely. The thickness of the unit is slightly different as the two products feel similar, but it doesn't feel like one side is too thick. Because of the design of the product, it feels like Sony is thinner, but you can see that it has almost the same thickness. Anker on the left and Sony on the right. Here is a picture of the inside of the unit. In the picture below, the left is the inside of Sony's unit, and the right is the inside of Anker's unit. For Sony, the left and right directions are printed in red on the inside of the unit, and the anchor is printed large L/R on the mesh inside the unit. It seems to be much better in terms of usability as the left and right are marked large. The AirPods Max released by Apple looked like this, but perhaps they didn't refer to it. The cushion on the outside of the unit has a larger anchor side, so it was more comfortable to wear. For those with large auricles, the Anker seems to be more comfortable than the Sony. This is a picture comparing the appearance of the two products when the unit is unfolded. The cushion at the top of the band is thicker on the anker side, and the size of the unit is similar between the two products, but the anker product looks bigger because of the design. Both products use a lot of plastic, and the Anker product is shiny due to the lighting when shooting, but both products are matte. Perhaps the anchor side is coated between matte and semi-gloss, so it is more reflective. Reviews The detailed setting method of the product can be done through the app. You need to download the app to set up the product. I'm using an iPhone, so I went to Apple's App Store and downloaded it, but if you're using an Android smartphone, you can go to Google's Play Store and download it. You can download the app by searching for SoundCore. Press and hold the power button on the headphones to put them on standby for Bluetooth connection, launch the app, select the model type, and select Life Q35 to connect. To proceed, proceed from left to right in the image below. You can set various equalizers through the app. After connecting the headphones to the app, click the Device Settings button and then click the Equalizer button for Life Q35 to set the equalizer settings. The setting supports two methods: selecting a preset and setting it custom. To enter the equalizer setting screen, proceed from left to right in the image below. You can apply the noise canceling (ANC) function according to the situation. If you go to the setting of the app's noise canceling function, you can set the noise canceling settings for 3 different ambient environments: transportation, indoor and outdoor. The setting supports two methods: selecting a preset and setting it custom. To enter the noise canceling setting screen, proceed from left to right in the image below. There is an additional function called Relax Sound. Rather than a special function, it is a function that plays the sound in the app to the headphones. You can set a timer to listen for a certain amount of time, and you can set the playback time as long as you need to fall asleep. To enter the setting screen, proceed from left to right in the image below. Wearing awareness, touch settings, and firmware update can be done through the app. When a new firmware is released, the function can be improved through an update, and the fit and touch function can be turned off or on. To enter the setting screen, proceed from left to right in the image below. First of all, it felt more comfortable to wear than Sony products, but it felt more comfortable because there was less pressure when wearing it. The Sony has a better feeling that it fits snugly on the head, but considering the tension of the band and the width of the cushion inside the unit, I felt that the Anchor was more comfortable when worn for a long time. Last winter, when I was using Sony products, my ears hurt when I used headphones while wearing glasses and a mask, but this product felt better in that area. The picture below is a picture of me wearing it on a doll with a huge head. When I put it on, it felt like it was easily spread out, and when I put it on, I could see that the doll's head was not pressed too much. The left and right directions are printed on the inside so there is no confusion between left and right when wearing. Inside Sony, this product has three modes: noise canceling, normal, and ambient sound listening mode. If you use the touch function, only two modes are switched: noise canceling and ambient sound listening mode. You can control the noise canceling (ANC) function by touch. If you look at Sony's WH-1000X series commercials, there is a scene where IU comes out and advertises that if you put your hands on the headphones, you can hear the surrounding sounds, and this product also supports that function. On the outside of the right unit, there is a function that supports touch and NFC as shown in the picture below. (I couldn't use NFC because my smartphone is an iPhone, but if you have an Android phone, you can easily connect using NFC) This product has 3 modes: noise canceling, normal, and ambient sound listening mode. You can switch between two modes: noise canceling and ambient sound listening by using the touch function. Decent sound even with noise canceling enabled Previously, I bought some headphones to be used as a secondary for Sony WH-1000X, and the product without noise canceling gave a good sound. Even when turned off ANC, the sound was disappointing. Then, while watching YouTube, I saw a review of this product, and the price is not bad, but the price is quite different from the Q30, which is similar to the Q20, and I bought it because I could apply a discount + discount code to commemorate the domestic release. After listening to it, I thought it was a good purchase. The price is slightly higher than the products I've previously purchased (the price range is between 40,000 and 60,000 won with a discount applied), but the satisfaction when listening to the sound is significantly higher. First of all, based on the device to which the noise canceling function is applied, in the case of the Q20 I purchased before, when I turned on the noise canceling (ANC), the treble felt stuffy. In the case of other headphones I've purchased before, I've experienced a different sound when activated in the case of a product with noise canceling (ANC). Didn't. When I listened to headphones or earphones, I felt that the high-pitched sound was not stuffy compared to the products I had purchased, and the low-pitched sound was also solid. Compared to Sony headphones, the treble section has a similar feel and the bass section feels a little more rounded. However, considering the price, it is a satisfactory sound overall, and at this price point, I thought it would be a good product to buy without thinking back and forth. There are products that can be purchased in the mid-to-late 100,000 won range, such as Bose's QC35, if you shop directly, but if you are willing to purchase headphones and want to purchase at a price of less than 300,000 won in Korea for A/S, it is recommended that you buy this product unconditionally at this time. I would like to recommend it. #anker #anc #activeanc #wireless #headphone #soundcore #life # q35 #compare #sony #wh1000xm4 #anker #noise canceling #wireless #headphones #unboxing #components #unboxing #specs #reviews # no- can performance #sony #comparison

This is a product that I made an impulse purchase after hearing about this product while watching YouTube reviewing audio devices. What's more, I lost control when I heard in the review that they were giving a discount to commemorate the official release in Korea and providing an additional discount code. 🤣 Still, just in case, I looked at the prices sold on overseas sites and found that it was a product with a price range of around $140-150. Now, it has been about 3 weeks since I purchased the product, and the discount code has expired, so it is difficult to purchase at the price I purchased (in the early 100,000s), but the discounted price is also cheaper than buying from overseas. The current selling price is 119,000 won, but the discount price is only available at Anker Korea , so if you are interested in purchasing, we recommend that you purchase it before the end of the discount period. For reference, when I bought it, only navy color was available, but now beige color is also available, so please refer to it. In my experience of purchasing the product and using it for a while, it was a very satisfactory product with good sound for the price and various functions. In the case of other headphones I've purchased before, I experienced a feeling of stuffiness in the treble or a different sound when activated in the case of products with noise canceling (ANC). It doesn't make much difference whether you use (ANC) or not. And another surprise is that you can switch between Noise Canceling (ANC) and Ambient Listening modes by long touching the right side of the device. This function is a function we have seen in the Sony WH-1000X series, but it seems that it was released at a price of 30% compared to the WH-1000X series, targeting the WH-1000X series. For a more detailed description of the product, please check the user reviews Then, let's take a look at the components and appearance. Box exterior and opening The front of the box has a large picture of the product printed on it, and the name of the product is printed on the upper part, and the contents of various functions are printed on the lower part. The side design, similar to other Anker products, consists of a picture of a model wearing the product and a picture with a description of the product's function. The functions of this product are marked on the back of the box. At the top, it is said that noise canceling can be set according to 3 different environments, the long battery life of 40 hours, 4 hours of use with 5 minutes of charging, and the touch-type ambient sound listening function are explained below. At the bottom of the box, there are various certification marks and serial numbers, and included components are marked with icons. unboxing The box is made of thick paper, unlike the Soundcore Life Q20 . I bought it in Korea and the box came without any major dents, but even if I buy it from overseas, it doesn't seem to come with a crumpled box like the Q20 I bought and received before. The way to open the box is to lift the top lid (?) upwards to open it. There is a plastic hook on the top of the box, so I expected to open the top cover or slide it, but I am using the same method as taking out a smartphone. When you lift the box up, it is covered with a layer of paper inside, and when you open the sticker to the left and right, You can see the carrying pouch with the product inside. It adopts the same configuration as the product packaging method seen in the Sony WH-1000X. When you take out the pouch, there is a caution booklet and a manual at the bottom. The plastic at the bottom is in the shape of a pouch so that the product can be fixed. When you take out the pouch and open it, the product is inside as shown in the picture below, and between the units there is a pouch containing an in-flight connection jack, a USB Type-C cable for charging and a wired connection cable. Components The product is contained in a transparent blister removed from the box. Other than that, there are no separate components. Headphones, a 3.5mm wired cable, and a USB cable are inside the blister, and a leather-like pouch, instruction manual, and warranty card are inside the plastic wrapper. Note The booklet is quite thick, but every page contains the same content. It seems to be a thick booklet because it is written in each country's language. This is the manual I saw in the Q20 I bought before. This is the second time for Anker's headphones, and it's easy to see because of the familiar structure of the manual. The icon and function name are placed on the upper left of each page, and the page is placed on the upper right of each page to make it easier to find. Compared to the Q20, the manual has also evolved, and there is a description of the function at the bottom. There is also an explanation in Korean in the middle, probably because it is an official import product in Korea. Because it has many functions, it is composed of several pages and there are a few pictures of the manual. This is a guide that is always included when you purchase Anker products. The inside of the case is uniquely engraved on the plastic for the location of the headphone unit and the left and right directions, and is shaped so that the direction of the unit must match so as not to confuse the location of the headphone. Appearance Like its predecessor, the unit can only be rotated forward and backward by 90 degrees, and the direction can be rotated to one side. The way it folds inward for storage is the same as the " Sony WH-1000XM4 " and " Anker Soundcore Life Q20 ". However, the structure of the folding part is different, and the corresponding part is all made of plastic, so I am a little worried about the durability when using it for a long time. The inside of the band extension slide part is made of plastic and the outside is made of steel. The part that extends the slide is made in such a way that it taps when it is stretched or shortened, so it is easy to match the left and right lengths equally. The sliding part has a unique design, which gives it a neat feeling as the joint is not visible when viewed from the outside when folded or unfolded. Various certification marks are printed on the inside of the band above the left unit. The serial number is engraved on the inside of the slide part. At the bottom of the right unit are volume control buttons, play/stop buttons, and a wired connection jack. And there are two small holes under the button, which is probably a microphone used for calls. The part where the sticker is slightly visible above the button is the part where the touch sensor is located. At the bottom of the left unit is a power on/off button and a noise canceling (ANC) toggle switch. And to the left of the power button is a USB Type-C port for charging. There are two large holes at the top of the unit on the left and right, and I think it's probably the microphone part for listening to external noise for noise canceling. As I was writing a review, I thought that the content would be too long to read, so I separated the post. Click the link below to view product specifications and user reviews. #anker #anc #activeanc #wireless #headphone #soundcore #life # q35 #compare #sony #wh1000xm4 #anker #noisecancelling #wireless #headphones #soundcore #life #opening machine #components #unboxing #specs #review #nocan Performance #Sony #Comparison

The product to be introduced this time is the Temperature and Humidity sensor of the newly purchased Xiaomi Youpin/Youpin. Among the two types of temperature/humidity sensors I bought before, the one in the bathroom is made of E-Ink, and the display is large enough to read easily. But the other is similar display to the one used in the watch, so the readability was very bad. So I was looking for a replacement product and I bought this product. (If I had found it earlier, I would not have had to spend on purchasing duplicate products.. 🥺🥺🥺) Unlike previous purchases things, this product does not connect to a smartphone via Bluetooth. It just works alone, but it doesn't seem like there will be any inconvenience as it will be used for occasional viewing in the living room. (It was in the product description when I bought it, but I didn't read it properly before purchasing, so I only found out after opening the box and looking at the back. 😅😅) The pros and cons of using it for about a month are summarized below. Good: The big display makes it easy to see even from a distance, and it is possible to see it to some extent even in the dark. Bad: The downside is that it requires a hanging hanger to attach to the wall and the humidity measurement seems inaccurate. "If you have any questions after reading the blog, please leave a comment. I'll try to answer what I can tell you." For more information about the product, please read the post below. box exterior The box is a plain white box with nothing. At the least, I thought the product name would be printed, but there are no letters anywhere on the front, back, left and right, top and bottom. 🤐🤐🤐 There is no printed content, but the description in the seller says that it is a Xiaomi Upin product. (Xiaomi Youpin refers to products distributed through the online sales channel of the Xiaomi group, not manufactured by Xiaomi) open box The box does not have a sealing seal, just you can take out the product packaged in the air cap just by opening the top. There is an instruction manual at the bottom of the product. Since the air cap is not taped separately, you can just take it out. When the film attached to the liquid crystal part of the product is removed, the product is ready to use. Components It was all the components as below. The components are the product body and the manual. That is all. The manual is bilingual in Chinese and English, and it is in a foldable configuration like most of the products you buy from AliXXXXX. When unfolded, the folded manual became 7 horizontally, so I had to cut it into 3 or 4 pages to take a picture. In the manual, there is a description of each item displayed on the front of the product and a button on the back, and the temperature/humidity measurement range and setting method are printed on the product. The only thing to set is the year, month, date and time. Setting up the clock is also simple, so if you've ever set up a desktop electronic clock that you put on your desk, you don't need to look at the manual. Appearance The picture below is the front view with the power turned off. What is unique compared to the temperature/humidity sensors I have purchased is that there is a gauge bar for humidity in the front, not electronic, but in a fixed form. A view of the sensor from the front. Do you see the 💡 shape on the bottom bezel? This part is a switch that turns on the backlight, but it is a touch type. At the top of the rear part, there are parts used for wall-mounting, and there are buttons for setting. There are three buttons for changing the unit of temperature and for setting the clock. Below that is a cover for the battery compartment and a stand for tabletop use. A side view of the product. I thought it was a perfect right angle, but it is slightly inclined to the front, so the back side is wider and the front side is slightly narrower. specification The weight of the product measured at 125g shown in the photo below is with batteries installed, and since two AAA-size batteries that are the same as the batteries placed in the product weigh 24g, the product itself seems to weigh about 100g. The width and length of the product are almost square in length. It measures 90.4 mm in width and 87.3 mm in height. The thickness is 22.7mm, which is quite thick compared to the products I bought before. Reviews Previously purchased products use so-called coin batteries or coin batteries, whereas this product uses commonly used AAA size batteries. And since it is not connected to a smartphone, you have to set the settings using the buttons on the main unit. In the case product of connection with a smartphone, the watch is automatically synchronized, so there is no need to set the watch again even if the battery is replaced later. But this product can't do that. The battery cover can be fully opened by pulling the legs used for the stand and then sliding them. Open the cover and insert AAA size batteries in series as shown in the picture below, then slide the cover upwards to close it. It is good to use AAA size batteries because they are generally easy to obtain. But there is a concern that the batteries will need to be replaced frequently if they are likely to use a lot of power. In the picture below, the left is the backlight off and the right is the backlight on. Because the display is large, the number on the screen is also large, so it shows good visibility to check the current status even if it is a little far away or it is somewhat dark. it is very good. To hang the sensor on the wall, raise the hanger holder upward and hang it on the hanger as shown on the left. (When I first installed it, I did it like the picture below, but it didn't looking good.) Tip. So I attached a thin neodymium magnet on the back to fix it on the wall. Thanks to that, it's attached much neatly 😁😁 To use it as a tabletop, pull the stand on the back as shown below and place it on a desk or dressing table. It looked much better as a table top, unless it was neatly attached to the wall with a few tips as described above. The display is large and the numbers on the screen are large, so I felt that it was the perfect product to use in the living room. Also, it felt good to be able to recognize the comfortable level of the current humidity with a gauge so that it could be recognized much more easily. However, the button for setting is on the back, so I think it can't be helped, but when I hung it on a hanger and fixed it on the wall, it felt bad from the interior side, and there was no big difference in temperature, but the humidity was much different from the sensor I bought and used. Therefore, it was thought that the accuracy of the humidity sensor was low. Not being linked with a smartphone is a disadvantage, but I did not think it was unconditionally bad because there were also advantages that arise from it. Except for the accuracy of the humidity sensor, I think it is a good product because the screen is large and visibility can be secured even at night by using a backlight. do. #xiaomi #youpin #temperature #humidity #sensor #unboxing #components #appearance #spec #reviews #xiaomi #yupin # keepables #temperature #humidity #sensor #pro #components #appearance #unboxing #unboxing #used #reviews